Page 9 - ESDMAN CO., LTD.

Room Ionization System

Console

Console 001-5800
Input Voltage 100-240VAC
Output Voltage 24VDC
Communication Method RS485
Interface of Monitor RJ-11 port connected to software by RS485 port
System Capacity Optional 001-5800 can be connected to 32 units 001-5818 digital room ionization via RS485

001-5819

Product Description

001-5819 DC ionizing bar can be used in cleanroom. It can control multiple connected ionizing bars through the 5800 console and
software. It provides high ion output which can quickly neutralize static electricity on the wafer or workbench. 001-5819 DC space
ionizing bar is designed for electrostatic control of environmental systems, Streamline cabinet and workbenches. Different length of
Ionizing bars can be supported. In the environment of using laminar flow,using pulsed DC and continuous DC technologies to
neutralizes static electricity, which is same as the indoor Ionization system, Both ion balance and output power of the 001-5819 DC
ionizing bar can be adjusted. The adjustment method is using software and remote control.
001-5819 DC ionizing bar have variety choices of emitter needles (tungsten alloy, titanium alloy, monocrystalline silicon
needle),Different materials of emitter needles can be used in different environments, single crystal silicon emitter needle can be used
in the production of wafers, Tungsten alloy and titanium alloy emitter needles can be selected if optional single crystal silicon emitter
needles is not necessary.
When the 001-5819 DC ionizing air bar is controlled by software or remote control, it can provide comprehensive ionizing bar
control.Modes can be setted: working mode adjustment (Pulsed DC Mode; Steady State DC Mode ), positive and negative ionization
synchronous with switching time, output power adjustment, only eliminate positive electricity, only eliminate negative electricity,
high-voltage abnormal alarm, cleaning cycle alarm and other functions.(It is recommended to use the Steady State DC mode at a short
distance of 30 cm, and use the pulsed DC mode at long distance.)

Features Benefits
Bar ionizing eliminator Wide coverage area, length can be customized
Sequential bipolar ionization The opening time and closing time is adjustable which can provide the greatest
Adjustable positive and negative output power ionization effect.
Alarm device According to the airflow environment, The positive and negative output power can
Remote control be adjusted in an accurate ratio of 1-99
Software control It can monitor the high-voltage output status, and the red LED will alarm when the
Unique appearance design high-voltage generator
The working status of the ionizing bar can be controlled by the remote control
The working status of the ionizing bar can be controlled by software
Can neutralize static electricity under laminar wind

Product Specification
Ionizing Air Bar 001-5819
Input Power 24VDC
Setting Method Remote control, monitoring software
Output Ion High Voltage 0j20KVDC±10% The ratio of positive and negative high voltage output can be adjusted separately
Output Current <15uA, the current is limited to avoid the risk of electric shock
Interface Each Ionizing air bar has interface at both ends
The precise timing of the adjustment level is 0-15 seconds @ The accuracy level of time adjustment
Control
is about 0.1 seconds
Operation Mode Pulsed DC Mode; Steady State DC Mode

06