Page 27 - ESDMAN CO., LTD.

Wrist Strap On-line Monitor

001-0101; 001-0102

Product Features

Measure single wrist strap system resistance in real time.
Start testing while plug wrist strap into monitor, no monitoring turn off function.
Monitor alarm once wear wrist strap unnormally.
Monitor stop alarm while plug out wrist strap.
Monitor will alarm when wrist strap in open circuit or poor contact.
Monitor single wrist straps and the meter ground cord in the same time.
Wrist strap alarm limit: 1.2 M (Factory preset)
Accuracy: <+10%
Red LED light will flash together with audible alarm when test fail.
Aluminum alloy casing design: Stylish appearance and with good shielding performance.
The grounding wire is directly welded to the PCB board,which is firm and not easy to fall off, and high-precision fine-tuning ensures
accurate monitoring in a working area with a good anti-static environment and performance.

Calibration Method
Install the wrist strap monitor to the working area, and plug power adapter into wrist strap on-line monitor 001-0101/001-0102.
Plug the “OP" banana jack from calibrator 001-1006 into “wrist strap” hole on 001-0101/001-0102.
Cut off the GND connection of wrist strap on-line monitor, and connect it to the GND wire of calibratorđgreen light illuminate, rotate the
knob of the calibrator, the red light of the instrument will flicker, and there will be an alarm sound, pull out the "OP" banana plug, and
LED of monitor will turn gray, indicating that the instrument is normal and the calibration is finished.
If the instrument is abnormal during calibration, you can use the resistance box to adjust the meter, and then use the calibrator to
repeat above steps for another calibration. At the same time, you can consult ESDMAN Sale team for asistance.

001-0101 001-0102
Monitor number of single wrist strap 1 2
LED light illuminate gray indicates the power supply of the meter is abnormal, and
LED status(Yellow light illuminate) LED light illuminate yellow indicates the power supply of the meter is normal.
Indicate that the personnel grounding connect is normal, and the wrist strap
LED status(Green light illuminate)
grounding connection is well.
LED status(Red light with buzzer sounds ) Indicate that the personnel grounding connect is abnormal, please check the
wrist strap wearing and grounding connection.
Alarm LED red light on, buzzer alarm
Wrist strap alarm limit: 1.2 M (Factory preset, also can be adjusted on the meter
Wrist strap alarm limit
according to customer's request.)
Power supply AC100~240V50/60Hz; DC12V; 100mA
Meter size 105x78x28(mm) 131x63x28(mm)
Weight 60g(without power supply) 110g(without power supply)
Anti-interference ability Great
Accuracy <±10%
Application 0°C-60°C, Indoor use

24