Page 43 - ESDMAN CO., LTD.

Surface Resistance Meter

Applicable measurement parameters:(suitable for 001-9801 & 001-9802)

When the 5 pound electrodes or concentric ring probe is connected through two sockets on the top of the meter, it can measure:
resistance to-ground (RTG), point-to-point resistance (PTP),volume resistance,and surface resistance, When using two parallel
electrodes on the back, it can measure the surface resistivity.

001-0800 adopts micro-stroke buttons, the full-scale test voltage is 100V, and there is an on/off dial button; low battery voltage with
alarm
6
12
6
3
When the test resistance range of 001-0110 is around 10 -10 , the test voltage is 10V; when the test resistance range is around 10 -10 ,
the test voltage is 100V.
001-9002/001-9009 SPP Pen Probes
001-9002/001-9009 SPP Pen Probes is designed according to ESD control requirement ANSI/ESD S20.20đIEC61340-5-1đJESD
625-B.Pen Probes work with most megohm meters, electrometers and other surface resistance meters for measuring surface
resistance and volume resistance of materials which is condutive or anti-static or insulative, especailly the material which can not be
measured by standard 5 pound electrodes.

Concentric Pen Probe 001-9009
Probe Inner Concentric Diameter Փ2.5mm
Probe Outer Concentric Diameter Փ1.5mm
Probe Body Weight 45.1g
(Including the Commutator boots)
Probe Body Diameter Փ13.3mm
Probe Body Length 152mm
Two-Point Pen Probe 001-9002
Probe Diameter Փ2.5mm
Probe Body Weight 43.6g
(Including the Commutator boots)
Probe Body Diameter Փ13.3mm
Probe Body Length 152mm

001-9003 Concentric ring probe
The inner ring diameter is 30.48 ± 0.64 mm (1.20 ± 0.025 inches)
The inner diameter of the outer ring is 57.15 ± 0.64 mm (2.25 ± 0.025 inches)
Ring width 3.180 ± 0.254 mm (0.125 ± 0.010 inch)
Weight 2.27 kg±.06 kg (5 pounds±2 ounces)
The Shore A (IRHD) hardness of the conductive material on the bottom surface is between 50 and 70
Diameter of electrode bottom surface: 67.23mm; electrode height: 105.84mm

40